Tubular Rivets #104

Please watch the video below before you purchase rivets!

Solid brass and nickel plated steel #104 tubular rivets for use with the Handyman Press.

Caps and rivets are sold separately. The cap gives the rivet a finished look on both sides. 

When doubling and riveting use the following chart to purchase the correct size rivets:

• Super Heavy 6/16"
• Standard 5/16"
• High Flex 4/16"
• Also use 4/16" if not doubling (adding name plates etc.)

Some other combinations are:

• Three layers of Standard 6/16" or 7/16" (6/16" is almost too tight, 7/16" is almost too loose)
• One layer of Standard and one layer of Super Heavy 5/16" or 6/16" 
• Two layers of Standard and one layer of Super Heavy 7/16"
• Two layers of Adjustable 4/16" 
• Three layers of Adjustable 5/16"

These rivets require a rivet press (like the Handyman Press).

All rivets are 9/64" diameter x the length. The caps are 21/64" diameter.