These punch handles are perfect for the do it yourselfer or manufacturer. Simply attach the punch (sold separately) that you need and you are ready to punch a hole.
Here is a simplified chart for choosing your punch Handle:
- #3c Punch = #975 Punch Handle
- #4c Punch = #975 Punch Handle
- #5c Punch = #975 Punch Handle
- #6c Punch = #975 Punch Handle
- #7c Punch = #975 Punch Handle
- #8c Punch = #975 Punch Handle
- #9c Punch = #975 Punch Handle
- #10c Punch = #975 Punch Handle
- #12c Punch = #976 Punch Handle
- #14c Punch = #976 Punch Handle
- #15c Punch = #976 Punch Handle
- #16c Punch = #970 Punch Handle
- #18c Punch = #970 Punch Handle
- #20c Punch = #970 Punch Handle
- #22c Punch = #970 Punch Handle
- #1093 Oval Punch = #970 Punch Handle for End Punches
- #1094 Oval Punch = #970 Punch Handle for End Punches
- #1095 Oval Punch = #970 Punch Handle for End Punches
- #1096 Oval Punch = #970 Punch Handle for End Punches
- #1097 Oval Punch = #970 Punch Handle for End Punches
- #1098 Oval Punch = #970 Punch Handle for End Punches
- All end punches require the #970 Punch Handle for End Punches
- Rope Clamp Dies require the #970 Punch Handle for End Punches
Choose your punch handle based on the punch that you need to use:
- The #975 Punch Handle works with #3c through #10c Punches
- The #976 Punch Handle works with #12c through #14c Punches
- The #977 Punch Handle works with #16c through #18c Punches
- The #978 Punch Handle works with #20c and up Punches
- The #970 Punch Handle works with all End Punches & Rope Clamp Dies
Here is a handy chart to convert the hole punch sizes to millimeters:
- #3c 3/16” = 1.59 mm
- #4c 5/64” = 1.98 mm
- #5c 3/32” = 2.38 mm
- #6c 7/64” = 2.78 mm
- #7c 1/8” = 3.18 mm
- #8c 5/32” = 3.97 mm
- #9c 11/64” = 4.37 mm
- #10c 3/16” = 4.76 mm
- #12c 13/64” = 5.16 mm
- #14c ¼” = 6.35 mm
- #15c 9/32 = 7.15 mm
- #16c 5/16” = 7.94 mm
- #18c 3/8” = 9.53 mm
- #20c 7/16” = 11.13 mm
- #22c ½” = 12.70 mm
